This fast, clean cutting TurboShear Drill Attachment is specialized for cutting 1/2-in. (12.7 mm) fiber cement backer board. The drive shaft of this one-hand operation accessory quickly inserts into the chuck of a corded or cordless electric drill! A sleek, lightweight aluminum cast shear head and molded drill clamp allow maximum portability and ease to go wherever the work is. The compact telescoping drill clamp adjusts to fit both length and width of the drill housing including smaller bodied impact drivers. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360° and set in any position for optimum tool clearance or to facilitate easy material flow. This versatile and economical accessory is a welcome replacement for messy, imprecise, scoring and snapping methods of trimming backer board. A wide skid-plate on the head design stabilizes cutting action for extra smooth results. This versatile shear navigates curved-pattern cuts for window and door arches and will also cut 5/16-in. (8 mm) fiber cement siding plank. The hardened carbon steel blade and skid plate ensure long uninterrupted service life. You can even rotate the tool’s skid plate to maximize acceptable cutting life. And the blade and skid plate set is also easily replaceable on the job.
|Catalog #||Description||Net Wt. lbs. (kg)|
|TSF2||TurboShear - Fiber Cement Backerboard, Accessory||2.5 (1.13)|
|TSF2CEV||TurboShear - Fiber Cement Backerboard, Accessory with Carrying Case||4.55 (2.06)|
|TSF2RBN||Replacement Blade and Skid Plate Set (NEW)|
|TSF2RB||Replacement Blade and Skid Plate Set|
|TSCG||Replacement Chuck Guard|
|TSDC||Telescoping Drill Clamp*|
*Compatible with all current and pre-existing Malco TurboShears in the market. Use it to make the orginal TS1 TurboShear a one-hand operation by adding a clamp, or to replace the clamp of any of the following TurboShear models: TSHD, TSF1, TSF2, TSS1 or TSNS1.
Drill Requirements: Min 1/4 in (6.35mm) Chuck, Min 14.4 V-DC/Max 7 A-AC
What materials will the turbo shear cut?
TSF2 - The Turboshear is rated to cut 1/2" (13 mm) thick James Hardie backer board, 1/2" (13 mm) thick Durock backer board and 5/16” (8 mm) fiber cement siding.
How clean is the cut?
TSF2- The Turboshear fiber cement series have factory set clearances for optimum performance, no adjustment needed.
Average customer rating of 4.5 out of 5 based on 7 total testimonials